If you look really close, the road surface begins to take on the appearance of mountains .


I decided to take a walk down the street from my home. I made my way further out onto some old country roads. What I saw was different types of road surface which included, gravel, course black top, smooth black top, patched black top and concrete.
Patches make for mini mountain climbs and potholes are like a small canyon expedition.


During my walk, I began thinking about my old racing days. I remember a friend of mine who looked at any energy that didn’t move you forward as wasted energy/movement. Some examples of this would be a motor cross cycle flying through the air. This looks really impressive; however they are often passed by the cyclist who gets his wheel back onto the ground and moving forward. A drag racing car which pulls a massive wheelie with its front end of the car pointed towards the heavens also looks very impressive. In this case, the energy used to lift the front of the car up is much better used to move the car forward. These are just a couple of examples as there are many.


As I continued on my walk, I took note to each dip and crevice in the road along my path. The small hills on the surface of the road seemed like they formed mini mountains. Some of the potholes reminded me of miniature canyons. We realize that we can’t have a perfect smooth road like glass or we could not stop our vehicles in the rain. There is a balance between smoothness and traction for obvious reasons.
A smooth surface like granite would be efficient, however a vehicle could not stop in the rain.



Let’s get back to wasted energy. Any time when there is a gap, patch, pothole or even rough service area, it hinders forward movement of a vehicle. Most of this energy is absorbed by the vehicles suspension. The up and down motion of our suspension is dampened by the shock absorbers and this energy is converted into heat. Anything that creates heat without moving a vehicle forward detracts from a vehicle’s fuel efficiency.


There have been a lot of great efforts created from the Department of Energy “Super Truck Projects.” This could even be greater if they were combined with a “Super Road Project.” Think of how much fuel could be saved if we traveled on smooth roadways with minimal grade changes. Also, if when we arrived in cities and were offered true through lanes or bypasses in which there was no interaction with local traffic. In my mind, this lane would start 15 to 20 miles before you entered the city and wouldn’t end for 15 to 20 miles after traveling outside of the city. Think how much efficiency this would add by not stopping or
Smooth truck, smooth trailer and smooth driving equals maximum efficiency .
interacting with local traffic.


I’m back from my walk and it’s time for me to get moving forward myself. Time to pack and hit the road.





Comments (3)

Henry Albert

Henry Albert is the owner of Albert Transport, Inc., based in Statesville, NC. Before participating in the "Slice of Life" program, Albert drove a 2001 Freightliner Century Class S/Tâ„¢, and will use his Cascadia for general freight and a dry van trailer. Albert, who has been a trucker since 1983, was recognized by Overdrive as its 2007 Trucker of the Year.

Read These Next...

TRUCK Smart

Choose Wisely

April 28, 2013

TRUCK Smart

Communicate in Writing

October 07, 2015

 
 

This is definitely a line of thought that should be expressed in California. How much less diesel fuel would be used, exhaust generated, if they would fix the roads?

May 29, 2015 19:34:08 PM

Interesting that you posted this right now. Yesterday I took a short trip a couple hours north of town and I was thinking of the road conditions, not so much in terms of the impact to fuel economy but the negative impact to my tires, shocks and suspension. Then I read this article and it takes it to another level. Very interesting and well thought out!

May 27, 2015 8:15:21 AM

True through city lanes would be so cool.

May 27, 2015 5:24:15 AM